Finish cutting elevator ribs, de-burr, drill relief holes, bend first one.
1.83 hours.
Related Posts
Rudder Tip Rib
I thought I would do some trial forming of the rudder tip rib in a piece of 2024 sheet scrap. This gave me some good […]
Rudder Skin
Cut skin oversize, however bottom edge dimension is a tad under full skin width bent okay, but bends slightly uneven. Will make another- no problem […]
Rudder Tip Rib
Began forming rudder tip rib. Fully expected this would require several attempts! 3.57 hours