Continue with rudder build- drill and cleco doublers to spar.
3.83 hours.
Related Posts
6-T-4 5 Rudder Spar Doublers
- Glenn
- March 22, 2008
- 0
Modify brake, then on advice from Debo Cox and Dave Clay left extra 100mm on material before bending, then decided to add extra bolts in […]
Rudder Tip Rib
- Glenn
- January 28, 2008
- 0
After three more attempts and experiments I finally arrived at one I was happy with. One of the problems I had was the plans are […]
Rudder Skin
- Glenn
- May 18, 2008
- 0
Rudder skin- made second rudder skin, good bend in improved brake, complete bend by gradually cramping down to rounded 1/4″ plywood strip- excellent results this […]