Mark and cut Spar Cap Doublers and Centre Spar Caps.
1.18 Hours.
Related Posts
Tie Down Rings, Torque Tube Bearing
- Glenn
- June 28, 2009
- 0
Cleaned up Aileron Bellcranks. Went ahead and made 6-W-9-1 Tiedown Rings, 6-B-17 Rear Torque Tube Bearing. 4.63 hours.
Spar Caps & Angles
- Glenn
- May 2, 2009
- 0
Finish straightening Spar Cap Angles, mark off and cut Spar Caps to finished lengths. 2.63 Hours.