Rudder skin- made second rudder skin, good bend in improved brake, complete bend by gradually cramping down to rounded 1/4″ plywood strip- excellent results this time, trim and test fit on skeleton- very happy with result. 🙂
5.32 hours.
Related Posts
Stabiliser Form Blocks
I started making the form blocks for the stabiliser along with all of the wing form blocks. I used 18mm MDF, rough cutting them with […]
Rudder Skin
Cut skin oversize, however bottom edge dimension is a tad under full skin width bent okay, but bends slightly uneven. Will make another- no problem […]