Continue with wing rib lightening holes.
0.70 Hours
Related Posts
Spar Cap Angles
- Glenn
- June 14, 2009
- 0
Continued with making new Upper Spar Cap Angles. The new versions are straighter and the old ones had some holes that were elongated. 3.7 hours.
Cutting wing skin, spar webs, etc.
- Glenn
- February 24, 2008
- 0
Cutting sheets- cut one rear bottom skin 6-W-2 8, readied .040 sheet for cuttiing spar webs, etc. 1.93 Hours.
Cutting 0.040 Sheet
- Glenn
- March 2, 2008
- 0
Continued cutting 40 thou sheet including main spar webs. These took about 25 runs with an Olfa P-800 knife and were a bit tricky to […]