Bevelling form blocks contd… Posted on October 14, 2007August 5, 2008 by Glenn Bevelling form blocks, mark position of flutes. Continue with cutting blocks. 6.52 hours
Wing Wing ribs truing Glenn January 25, 2008 0 Completed truing up the flanges on the rear ribs and adjusting any bows in them. 1.5 hours.
Wing Spar Caps Glenn May 3, 2009 0 Spot drill then drill through spar caps. I used a small drill press of the type designed to hold a standard pistol grip electrid drill […]
Wing Cutting 0.040 Sheet Glenn March 2, 2008 0 Continued cutting 40 thou sheet including main spar webs. These took about 25 runs with an Olfa P-800 knife and were a bit tricky to […]