Dismantle rudder assembly, de-burr and scour prior to priming.
5.5 Hours.
Related Posts
Tip rib test #2
- Glenn
- September 16, 2007
- 0
Do second test of rudder tip rib with new form block. 7.6 hrs
Rudder nose rib
- Glenn
- January 26, 2008
- 0
Began forming the rudder nose rib. Realised I would probably not get it right first time, but the first effort wasn’t too bad. 2.67 hours
Rudder Skin
- Glenn
- May 18, 2008
- 0
Rudder skin- made second rudder skin, good bend in improved brake, complete bend by gradually cramping down to rounded 1/4″ plywood strip- excellent results this […]