Making new benches, re-arranging workshop. I built an 8′ X 3′ bench to start with, as I will be able to use this once the aeroplane is complete, then extended it to 12′ X 4′ with detachable sections.
Workshop
Related Posts
Made fluting pliers
Fluting pliers made from long nose vice-grips. The prongs are 1/4″ steel rod with the ends rounded and smoothed. 1.50 Hours
Flanging Dies
After some consideration I’ve decided to make the flanging dies from MDF, which should work okay. The difficulty in obtaining or having these items specially […]
Flanging Dies
Completed first flanging die, 115mm- not entirely successful- bend quite nice, but not to 45 degrees, or within the 15 degree tolerance. Probably use hand […]