Joggles completed using block in vice method- see photos. I had more success by cramping in this method and hammering down with a piece of close grained oregon, which is harder than the pine I was using, but has more give than hardwood.
2.82 hours.
Related Posts
Lightening holes
- Glenn
- February 10, 2008
- 0
Continue with lightening holes. Once complete, bring in next sheet of 0.025 and start cutting. 5.15 Hours.
Cutting 0.040 Sheet
- Glenn
- March 2, 2008
- 0
Continued cutting 40 thou sheet including main spar webs. These took about 25 runs with an Olfa P-800 knife and were a bit tricky to […]
Spars, fuel tank skins.
- Glenn
- April 25, 2009
- 0
Re-check Spar Web markings, de-burr edges prior to drilling. Cut Fuel Tank Skins to size. 4.33 Hours.