Spar Caps & Angles Posted on May 2, 2009September 23, 2009 by Glenn Finish straightening Spar Cap Angles, mark off and cut Spar Caps to finished lengths. 2.63 Hours.
Wing Spar Caps Glenn May 3, 2009 0 Spot drill then drill through spar caps. I used a small drill press of the type designed to hold a standard pistol grip electrid drill […]
Wing Wing ribs Glenn January 23, 2008 0 Joggles completed using block in vice method- see photos. I had more success by cramping in this method and hammering down with a piece of […]