Making new benches, re-arranging workshop. I built an 8′ X 3′ bench to start with, as I will be able to use this once the aeroplane is complete, then extended it to 12′ X 4′ with detachable sections.
Workshop
Related Posts
Flanging Dies
- Glenn
- July 12, 2008
- 0
Completed first flanging die, 115mm- not entirely successful- bend quite nice, but not to 45 degrees, or within the 15 degree tolerance. Probably use hand […]
Sheet Rack
- Glenn
- February 24, 2008
- 0
Spent this morning making a wall mounted rack to store cut parts. 2.50 Hours.
Flanging Dies
- Glenn
- July 5, 2008
- 0
After some consideration I’ve decided to make the flanging dies from MDF, which should work okay. The difficulty in obtaining or having these items specially […]